Contact

Service Hotline

+49 (0) 76 23 / 969-0 systems@mueller-group.com

Powder handling OEB Level 1+2

Powder handling without creating dust is always a challenge in industrial processes. Müller dust-free docking systems offer you a simple and reliable solution to this problem.
The Müller docking system centers around the silicone rubber cap, whose special lip seal ensures reliable, flexible and dust-free docking. This simple docking method used in conjunction with other Müller components enables a wide variety of dust-free product transfers to be carried out cost-effectively.

Standardlösung im Pulverhandling

Standard version

  • Simple docking
  • Accurate positioning not necessary
  • Key to sketch:
    • A - product
    • B - into machine
    • C - silicone elastomer cap
    • D - system inlet tube / cone
    • E - lip seal
Lösung mit angepresster Dichtlippe für Pulverhandling

Version with hopper pressed against lip seal

  • Simple docking if system becomes slightly pressurized
  • Key to sketch:
    • A - product
    • B - into machine
    • C - silicone elastomer cap
    • D - system inlet tube / cone
    • E - lip seal pressed down
Telescopic version

Telescopic version

  • Simple docking with telescopic intermediate tube
  • Key to sketch:
    • A - product
    • B - into machine
    • C - silicone elastomer cap
    • D - system inlet tube / cone
    • E - lip seal
    • F - telescopic intermediate tube
Charging a reactor

Charging a reactor

  • Key to sketch:
    • A - drum
    • B - hopper
    • C - inlet elbow
    • D - lift / swivel / invert column
    • E - lip seal pressed down
Feeding a tablet press

Feeding a tablet press

  • Key to sketch:
    • A - drum
    • B - hopper
    • C - nest
    • D - supporting column
    • E - lip seal
    • F - tablet press
    • G - mobile lifting and inverting unit
    • H - variant with dust extraction connection
Charging / discharging a twin-shell tumbler

Charging / discharging a twin-shell tumbler

  • Key to sketch:
    • A - drum
    • B - hopper
    • C - inlet elbow
    • D - lift / swivel / invert column
    • E - lip seal
    • F - twin-shell tumbler
    • G - drum truck
    • H - centering guide
    • J - Type MC butterfly valve
    • K - drum lid with filling opening:
      • K1 - Filling drum:
        lid placed over drum
      • K2 - Removing drum:
        lid retracted on discharge nozzle
Charging / discharging a mill

Charging / discharging a mill

  • Key to sketch:
    • A - drum
    • B - hopper
    • C - nest
    • D - supporting column
    • E - telescopic intermediate tube
    • F - mill
    • G - drum truck
    • H - drum lid with filling opening:
      • H1 - Filling drum:
        lid placed over drum
      • H2 - Removing drum:
        lid retracted on discharge nozzle
    • J - Nest swivels aside
Charging through a floor

Charging through a floor

  • Key to sketch:
    • A - hopper bin
    • B - carriage
    • C - Type MC butterfly valve
    • D - distribution manifold
    • E - Charging sequence:
      • Step 1
        Move hopper bin over charging opening
      • Step 2
        Docking with telescopic intermediate tube
      • Step 3
        Telescopic intermediate tube retracted
      • Step 4
        Opening covered